The MCPA-KAC is an Analogue Addressable Manual Call Point, designed and manufactured to comply with EN54-11,compatible with all GFE Addressable Control Panels. With its enhanced communications mechanism the typical response time, when in alarm, is approximately, depending on the number of call points connected to the device loop.
A bi-colour LED flashes Green when the unit is interrogated by the control panel and is illuminated
Red when in Alarm. The command to illuminate the Red LED is emitted by the control panel in response
to activation of the individual call point thus confirming that the Alarm signal has been received at the
control panel. The individual address, up to 125, of each call point is set via an eight way DIL switch.
This unit can be both surface and flush mounted and it can be easily reset using the supplied key after
activation. Optionally it can be supplied complete with a hinged flap which protects the trigger
element from accidental activation and reduces malicious activations as two actions are required in
order to activate the device.
| Technical Specifications | MCPA-KAC |
| Supply Voltage | Loop Powered 17-30 V DC |
| Current-Quiescent | 500 uA |
| Current-Device in Alarm | 3.5 mA - Alarm LED illuminated |
| Cable Si ze | 0.5-2.5 mm2 |
| Max. Recommended Per Loop | 30 |
| Colour / Case Material / IP Protection | Red/ ABS Flame Retardant 94 VO/IP24 |
| Oper. Temperature | 0C to 40C |
| Max. Humidity | 95% RH Non-Condensing |
| Dimensions | 93(H) x 89(W) x 59.5(D) mm |
| Weight | 160g |
| Order Code | Description |
| MCPA-FLAP | Addressable Manual Call Point |
